ATTILA
EN
52
9. CLEANING
9.1. CLEANING SAFETY WARNINGS
WARNING
Electrical hazard. Disconnect the power supply before cleaning.
WARNING
Electrical hazard. Do not use water jets and/or high-pressure lances to wash the internal
and external parts of the equipment.
WARNING
Do not damage the refrigerant uid circuit.
The first cleaning of the equipment must be carried out by specialised personnel.
Observe the following indications:
▪ Clean the surfaces of the equipment regularly, to avoid deterioration of the equipment materials
▪ Use only lukewarm water with non-aggressive detergents, then dry damp parts with a soft cloth
▪ Carry out at least daily periodic cleaning of the loading area to prevent the development and accumulation of bacteria
▪ Carry out at least one internal cleaning per month if the equipment is used to blast chill frozen products
▪ Do not use water jets to wash the internal parts of the equipment
▪ Do not direct water jets at electrical parts
▪ Do not use hard metal tools to remove any ice that may have formed.
Use work gloves when carrying out cleaning operations.
Do not use cleaning agents containing chlorine, dilute solutions, caustic soda, abrasive
detergents, muriatic acid, bleach or other products that can scratch or sand.
Do not use a steam cleaner to clean the equipment.
To Next Page
Loading...