Attila DIGITAL - Packaging Removal and Inspection

ATTILA
EN
14
4.1.2. PACKAGING REMOVAL AND INSPECTION
For the removal of the packaging:
STEP ACTION PICTURE
1 Remove the straps.
2 Remove the packaging cardboard.
3
Lift the equipment to remove it from the pallet.
Place the equipment in its designated place.
Note: 2 operators are required to lift and handle the
equipment manually.
4
Remove the protective films used to protect the steel
(both external and internal).
Togliere l’imballo in cartone;
Rimuovere il supporto in legno antiurto;
Sganciare le protezioni in plastica dei piedini;
Rimuovere la pellicola protettiva;
1
3
2
4
Keep the packaging pallet.
After removing all packaging materials, check for faults.
If any anomalies are found, do not install the equipment. Contact your Dealer or Authorised Service Centre within 8 days
from the date of purchase.