103
indicates the function is disabled.
11.8 Unit
This option allows you to adjust the measurement unit for the diagnostic system.
➢ To adjust the unit setting
1. Tap the Settings application button on the MaxiTPMS Job Menu.
2. Tap the Unit option.
3. Select the desired measurement unit. A check mark will display to the right of
the selected unit.
4. Tap the Home button on the top-left corner to return to the MaxiTPMS Job Menu.
11.9 About
The About section displays information regarding the MaxiTPMS tablet, including the
password, system version, hardware version, and the device’s serial number.
➢ To check the MaxiTPMS product information in About
1. Tap the Settings application button on the MaxiTPMS Job Menu.
2. Tap About to open the product information screen.
3. Tap Home on the top-left corner to return to the MaxiTPMS Job Menu.
To Next Page
Loading...
