35
Figure 4-18 Programming Screen
4.6.1 Copy by OBD
If the IDs retrieved from sensor activation and those registered to the TPMS ECU are
different, use Copy by OBD to program the IDs saved in the ECU to the new MX-Sensor.
By using this function, the tablet will program the sensor IDs retrieved from the ECU of
the test vehicle to the new MX-Sensors.
After the sensor ID is retrieved by performing diagnostics function. Select a wheel
location on the display and place an MX-Sensor in front of the tablet. Tap Copy by OBD
to program the new MX-Sensor.
To Next Page
Loading...
