114
14.5 Report
Test reports can be viewed, saved, printed, and shared in multiple applications such as
TPMS, Diagnostics, and Battery Test. The saved reports will be listed in this section.
➢ To share the cloud reports
1. Tap the Data Manager application button on the MaxiTPMS Job Menu.
2. Tap Report to open the report list. The saved reports will be displayed.
3. Select the report that is successfully uploaded to the cloud for sharing.
NOTE
If the report thumbnail displays , it indicates the report is successfully uploaded to
the cloud. If the report thumbnail displays , it indicates the report is not uploaded to
the cloud.
4. There are three ways to share the cloud reports: via QR code, via email, or via
message.
14.6 Uninstall Apps
This function manages the applications installed on the MaxiTPMS diagnostics system.
Select this to open a management screen, on which all the available vehicle diagnostic
applications can be reviewed.
Tap on the vehicle manufacturer icon that you wish to delete. The selected icon will
display a blue check mark at the upper-right corner. Tap the Delete button to delete the
application from the system database.
14.7 Data Logging
The Data Logging section keeps records of all Feedback (submitted), Not Feedback
(not submitted but saved) or History (up to the latest 20 test records) data loggings on
the diagnostic system. The support personnel will receive and process the submitted
reports through the Support platform. The solution will be sent back as soon as possible.
You may continue to correspond with the Support platform until the issue is resolved.
Data Logging can be performed during or after a testing or a diagnostic session is done,
and specifically, data logging is available in terms of TPMS, TPMS Retrofit, Diagnostics,
and Service functions.
➢ To send message to the technical center
1. Take Data Logging of the TPMS application as an example. On the main TPMS
screen, after a testing or diagnostics session is done, tap the Data Logging
To Next Page
Loading...
