65
6.4 Out-vehicle Test
Out-vehicle test is used to test the condition of batteries that are not connected to a
vehicle. This function aims to check the health status of the battery only. The battery
types and standards able to be tested are as follows.
Types: FLOODED, AGM, AGM SPIRAL, EFB, and GEL
Standards: CCA, SAE, CA, EN, IEC, DIN, JIS and MCA
6.4.1 Battery Test
➢ To perform the out-vehicle battery test
1. Tap the Battery Test application button on the MaxiTPMS Job Menu. The
Battery Test screen displays.
2. Select Out-vehicle Test.
3. Check the battery information and tap Start testing.
Figure 6-13 Sample Out-vehicle Test Screen
4. Wait for the battery test to complete and view the test results.
To Next Page
Loading...
