11
Figure 3-2 MaxiTPMS ITS600 Pro Job Menu
1. Status Information Bar
2. Application Buttons
3. Locator
Almost all operations on the tablet are controlled through the touchscreen. The
touchscreen navigation is menu-driven, allowing for quick access to test procedure, or
data that you need, through a series of questions and options. Detailed descriptions of
the menu structures are found in the chapters for each application.
3.1.1 Status Information Bar
The status information bar varies according to the stage of operations, and may display
the items described in the table below.
Table 3-1 Status Information Bar
is displayed at the upper-right corner of the
screen when the VCI is not successfully
connected to the tablet. After the MaxiVCI V200
is successfully connected to the tablet, the
icon is changed to (with a check mark).
To Next Page
Loading...
