67
7 OE Entry
7.1 TPMS by OEM Part No.
If the sensor’s OEM part No. is known, this function is an efficient method to activate all
known TPMS sensors and program specifically the MX-Sensors.
Selecting the OEM part No. opens the functional page for performing sensor activation
and programming. Tap the Support tab, then choose the vehicle model of your
preference, and then tap Enter Vehicle button at the bottom of the screen to access the
corresponding TPMS Service Menu and perform TPMS service function.
7.1.1 Application Scenarios
The following are two typical scenarios in which this method is ideal.
7.1.1.1 In the workshop
If the mounted sensor is faulty and the part number is known to the technician, the
technician can use this method to check the original sensor, and then write the
information that was retrieved into a new MX-Sensor via Programming. The newly
programmed MX-Sensor is ready to replace the original sensor and be installed on the
vehicle.
7.1.1.2 In the tire shop
If a customer needs to replace one or more tires and sensors, or purchase a large
number of sensors for one vehicle model and the OEM part No. of this model is known,
this function can be used to program up to 20 sensors at the same time.
7.1.2 Function Operations
1. Tap OE Entry on the MaxiTPMS Job Menu. A list of sensor OEM sensor
manufacturers will display. Swipe up or down the screen to find the manufacturer of
the sensor on the test vehicle, and tap the manufacturer name to enter the next
screen and then select the specific OEM sensor No.
To Next Page
Loading...
