38
Figure 4-21 Auto Create Diagram
4.7 TPMS Relearn
This function is used to transfer new sensor IDs into the vehicle ECU for sensor
recognition. Step-by-step relearn instructions are provided for all supported vehicles.
Relearn is needed when the new sensor IDs are different from the original sensor IDs
stored within TPMS ECU.
Three major methods are available for relearn process. According to the actual situation,
perform the most suitable TPMS relearn method.
⚫ OBD Relearn
⚫ Automatic Relearn
⚫ Stationary Relearn
4.7.1 OBD Relearn
4.7.1.1 OBD Relearn
The OBD Relearn function allows the tablet to directly write the TPMS sensor IDs to the
TPMS module.
To Next Page
Loading...
