110
14.1.1.1 Printing via PC Link
You can use your computer to print the data on the tablet. Follow the instructions below
to operate.
➢ To install the PC Link driver program
1. Download the Maxi PC Suite from www.autel.com > Support > Downloads >
Diagnostic Tool > Autel Update Tools, and install to your PC.
2. Double click the Setup.exe.
3. Select the installation language and the wizard will load momentarily.
4. Follow the instructions on the screen, and click Next to continue.
5. Click Install. The PC Link program will be installed into the computer.
6. Click Finish to complete the installation.
NOTE
1. The PC Link print program only supports Windows system, so please install the PC
Link program in a Windows-based computer.
2. Prior to installing the PC Link program, please confirm whether Adobe software is
installed in your computer. If not, install Adobe software first.
➢ To print a report via PC Link
1. Run the PC Link program on your computer.
2. Select the MaxiSys Printer tab.
3. Tap the Print icon on the tablet. A report will be sent to the computer.
⚫ If the Auto Print option in the MaxiSys Printer is selected, the received
report will be printed out automatically.
⚫ If the Auto Print option in the MaxiSys Printer is not selected, click Open
PDF File to view all the temporary files. Select the file(s) needed for printing,
then tap Print.
NOTE
1. To confirm that the printer is functioning normally, you can click Test Print in the PC
Link program to test.
2. Make sure the tablet is connected to the same network with your computer, either
via Wi-Fi or LAN, before printing.
14.1.1.2 Printing via Wi-Fi
➢ To print a report via Wi-Fi
1. Turn on your own Wi-Fi printer.
2. Power up the tablet. Swipe down from the top of the screen to display the
shortcuts panel. Toggle the WLAN icon to ON, then connect the tablet to the
To Next Page
Loading...
