33
There are three types of display modes available for data viewing, enabling you to view
parameters in the mode that best suited to present data, and one Unit section, for
switching the unit according to your preference.
➢ To set the display mode
1. Select the live data item of which parameters you want to view. Tap to open
the data stream details page.
2. Select one of the three display modes from the Display Mode section.
3. The corresponding display mode will show on the screen.
Table 4-4 Display Mode Table
The default mode that displays the
parameters in text.
Displays the parameters in waveform.
Displays the parameters in an analog gauge
mode.
4. On the Live Data Details screen, custom range is adjustable if under the
waveform and analog gauge mode. Tap the Restore Default Settings button
at the bottom of the screen to reset settings, or tap the Return icon on the top-
left corner of the screen to go back to the previous screen, and the adjusted
parameters will automatically display.
⚫ Service Function
Tap the Service Function button to display a menu of available service functions.
To Next Page
Loading...
