Protector Overview
AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339-4, 2022-12-09,
Autronica Fire and Security AS
Page 11
3.2.2 Ordering Information V-530
Use the following matrix to find the correct part number. The
example below shows the type key for an intrinsically safe V-530 for
zones 0, 1 and 2.
AutroGuard® multicriteria protector with SIL2 approval (pending)
Additional functions / alarm types
No additional functions/output
Intrinsically safe for zone 0, 1 and 2. ATEX / IECEX / CSA / INMETRO to be specified.
Intrinsically safe for zone 2. ATEX / IECEX / CSA / INMETRO to be specified.
UL 268, ULC S529, UL 521, ULC S530
Example
Part number: 116-V-530-EXIA
*SIL2 approval (pending) is not available for sounder and VAD functions, only for the
detection part.
Sounder is not available for UL variants.
** The extra high sensitivity feature is only available with EXIA and EXIC protectors.
3.2.3 Ordering Information V-100
V-100 Standard Base, White.
V-100 Standard Base. Black.
V-100 Standard Base. Customized color to be specified.
V-100 Standard Base with marine certification. White.
V-100 Standard Base with marine certification. Black.
V-100 Standard Base with marine certification. Customized color to be specified.
3.2.4 Ordering Information V-110/V-120
V-110 SIL2 base, with external LED output. White.
V-110 SIL2 base, with external LED output. Black.
V-110 SIL2 base, with external LED output. Customized color to be specified.
V-120 Ex ia/Ex ic SIL2 base, without external LED output. White.
V-120 Ex ia/Ex ic SIL2 base, without external LED output. Black.
V-120 Ex ia/Ex ic SIL2 base, without external LED output. Customized color to be specified.