Autronica AutroGuard Multicriteria Protector V-430 Series - Alternative B - Using the Rip off Label Inside the Autroguard Base; Labeling Bases with Tag Name Labels

Preparing for Configuration
AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339-4, 2022-12-09,
Autronica Fire and Security AS
Page 70
10.3.2 Alternative B - Using the rip off label inside the AutroGuard base
Inside each protector base a rip off label is attached. The rip off label
for an AutroGuard base shows the base’s serial number (SN),
consisting of 18 digits, where the three first digits represent the
Manufacturer.
10.4 Labeling bases with tag name labels
The AutroGuard bases are to be labeled with tag name labels before
or after installation. We recommend that they are labeled before
installation.
To label the bases with tag name labels, follow alternative A using a
QR code reader (see 10.3.1) or alternative B using a rip off label (see
10.3.2). If you don’t have a PC and must do this manually, use
alternative B described in 10.3.2.
Tag name label is to be placed
on the tagholder