Configuration for AutroSafe
AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339-4, 2022-12-09,
Autronica Fire and Security AS
Page 81
12.3 Site Configuration System Settings
• From the Tools menu, select Site Configuration System Settings
12.3.1 Detector Defaults – LED on Alarm/LED Alive Blink
• In the Detector Defaults settings, check the following boxes to
enable the functions (optional):
- Blink AutroGuard V Series Detector on alarm
- Enable AutroGuard V Series Detector LED alive blink
• Click OK when completed
To Next Page
Loading...
