Setting PIN Codes for the XT Series1
About this task2
The PIN for basic settings is disabled by default. You can enable it to require users to enter the3
PIN for all basic settings, such as changing the interface language. The default value for this PIN4
is 1234.5
Before you begin6
If configuring from the endpoint, you must first enable advanced configuration, as described in 7
Deployment Guide for Avaya Scopia
®
XT Series.8
To modify the PIN from the web interface, you must be connected via HTTPS (see Deployment9
Guide for Avaya Scopia
®
XT Series).10
Procedure11
1. Access the PIN settings. From the XT Series web interface, select Administrator12
Settings > Utilities > PIN Protect Settings. From the endpoint's main menu, select13
Configure > Advanced > Utilities > PIN Protect Settings.14
15
Figure 92: Modifying the administrator PIN16
2. Select Basic Settings to set or change the user's PIN code.17
3. Enter the current PIN code. The default PIN is 1234.18
4. Enter your new 4 digit PIN code, and re-enter if required.19
5. From the web interface only, select Save.20
Related links21
Configuring Advanced User Settings on page 10122
Setting PIN Codes for the XT Series
December 2017 Avaya Scopia
®
XT Series User Guide 109
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
Need help?
General
