Confirming Call Disconnections1
About this task2
To prevent accidental disconnection from a call, you can configure the system to confirm before a3
call is disconnected. By default, calls are disconnected when a participant ends the call, without4
requiring a confirmation.5
Procedure6
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-7
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.8
9
Figure 93: Calling preferences10
2. Set Confirm Disconnect to Yes.11
3. From the web interface only, select Save.12
Related links13
Configuring Advanced User Settings on page 10114
Configuring Multi-Stream Switching (MSS) video15
About this task16
The Multi-Stream Switching (MSS) video solution uses the advanced switched video capabilities in17
the Avaya Aura
®
Media Server (AMS) to distribute multiple video streams to each MSS aware18
participant. The following clients and components support MSS:19
• XT Series endpoints20
• Avaya Equinox
®
clients21
• Avaya Aura
®
components22
Configuring Advanced User Settings
December 2017 Avaya Scopia
®
XT Series User Guide 110
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
Need help?
General
