insert the service code and the XT will be automatically configured, with no need to go1
through the manual configuration.2
The steps for both options are described here.3
Related links4
Getting Started on page 195
Applying the Automatic Provisioning to Avaya Scopia
®
XT Series Endpoints on page 346
Configuring Basic Settings with the Quick Setup Wizard on page 357
8
Applying the Automatic Provisioning to Avaya Scopia
®
XT Series9
Endpoints10
About this task11
When you start the XT Series endpoints for the first time, the Quick Setup Wizard guides you12
through the steps for applying the service code.13
Procedure14
1. Start the XT Series endpoint for the first time.15
The Quick Setup Wizard is displayed.16
2. Choose your preferred language and click Next.17
18
Figure 17: Quick Setup Wizard19
3. Insert the service code and click Next.20
21
Figure 18: Enter Service Code22
Getting Started
December 2017 Avaya Scopia
®
XT Series User Guide 34
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
Need help?
General
