1
Figure 52: Joining a meeting after its start time2
Related links3
Participating in Meetings on page 634
Moving the PTZ Camera's Position5
About this task6
This section details how to set the angle and zoom of a PTZ camera connected to your Avaya7
Scopia
®
XT Series.8
A PTZ camera can pan to swivel horizontally, tilt to move vertically, and optically zoom to devote9
all the camera's pixels to one area of the image. For example, the XT Standard Camera is a PTZ10
camera with its own power supply and remote control, and uses powerful lenses to achieve11
superb visual quality. In contrast, fixed cameras like webcams only offer digital PTZ, where the12
zoom crops the camera image, displaying only a portion of the original, resulting in fewer pixels of13
the zoomed image, which effectively lowers the resolution. Fixed cameras also offer digital pan14
and tilt only after zooming, where you can pan up to the width or length of the original camera15
image.16
Once you have set the camera's angle and zoom, the system restores the last camera position the17
next time you use the camera. You can store multiple preset camera positions if needed (see 18
Deployment Guide for Avaya Scopia
®
XT Series).19
Procedure20
1. Access the camera control settings. From the XT Series web interface, select More21
Actions > Cameras Control. From the endpoint's main menu, select Control Camera.22
During a meeting, press ok/menu to access the videoconference menu (
Figure 53:23
Controlling your camera on page 66), and then select Control Camera.24
Moving the PTZ Camera's Position
December 2017 Avaya Scopia
®
XT Series User Guide 65
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
Need help?
General
