Avaya Vantage - Page 112

Parameter Type Default
value
Is set to
default
on reset
Description
• The Settings > Network > Ethernet > IEEE
802.1x authentication > Supplicant mode menu
on the device.
DOT1XEAPS String MD5 Yes Specifies a list of Extensible Authentication Protocol
(EAP) methods for IEEE 802.1x authentication.
Assign one of the following values:
• TLS
• MD5
The range is a default string length.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings > Network > Ethernet > IEEE
802.1x authentication > EAP Type menu on the
device.
DOT1XID String Ethernet
MAC
Address
of the
device
($MACA
DDR)
without
the
colon
separato
rs
Yes Specifies the IEEE 802.1X Supplicant identifier for
the Ethernet option.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings > Network > Ethernet > IEEE
802.1x authentication > 802.1x credentials
menu on the device.
DOT1XPSWD String Null Yes Specifies the IEEE 802.1X password for the
Ethernet option.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings > Network > Ethernet > IEEE
802.1x authentication > 802.1x credentials
menu on the device.
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
112
Comments on this document? infodev@avaya.com