Avaya Vantage - Security Parameters; Avaya Breeze CSDK Parameters

Parameter Type Default
value
Is set to
default
on reset
Description
This parameter is not supported in the non Avaya
Breeze
™
CSDK application based mode.
For provisioning, use the Settings menu on the
device.
Security parameters
Parameter Type Default
value
Is set to
default
on reset
Description
SELINUX_MODE Numeric 1 N/A Specifies the SELinux mode.
• 0: Sets the permissive mode.
• 1: Sets the enforcing mode.
Setting the SELinux mode triggers a device reset.
End users get the options to reset immediately or
later.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Avaya Breeze
™
CSDK parameters
The following parameters are supported by Avaya Breeze
™
CSDK-based applications.
Avaya Aura
®
Device Services parameters
Parameter
Type Default
value
Is set to
default
on reset
Description
ACSENABLED Numeric 0 Yes Specifies whether Avaya Vantage
™
Basic uses
contacts stored on Avaya Aura
®
Device Services.
You can assign one of the following values:
• 0: Avaya Vantage
™
Basic does not use contacts
from Avaya Aura
®
Device Services. Instead,
Avaya Vantage
™
Basic uses PPM contacts.
Table continues…
Avaya Breeze
™
CSDK parameters
May 2018 Installing and Administering Avaya Vantage
™
145
Comments on this document? infodev@avaya.com