Avaya Vantage - USB Parameters

Parameter Type Default
value
Is set to
default
on reset
Description
SSH_IDLE_TIMEO
UT
Integer 10 Yes Specifies the number of minutes of inactivity after
which an SSH connection is terminated. The range
is from 0 to 32767. Assign one of the following
values:
• 0: No timeout.
• 1 –32767: Number of minutes of inactivity after
which SSH is disabled.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
SSH_ROOT_ALLO
WED
Numeric 0 Yes Specifies whether sroot access is allowed. Assign
one of the following values:
• 0: sroot access is disabled.
• 1: sroot access is enabled.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the
46xxsettings.txtfile.
• The Settings menu on the device.
USB parameters
Parameter
Type Default
value
Is set to
default
on reset
Description
ENABLE_USB_GE
NERAL_PURPOS
E
Numeric 1 Yes Specifies if the USB general purpose port is
enabled.
Assign one of the following values:
• 0: USB port is disabled.
• 1: USB port is enabled.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
PPM does not back up or restore the parameter.
Other operational parameters and settings
May 2018 Installing and Administering Avaya Vantage
™
137
Comments on this document? infodev@avaya.com