Avaya Vantage - Dial Plan Parameters

Parameter Type Default
value
Is set to
default
on reset
Description
With IP Office, configure this parameter in the
46xxspecials.txt file.
PIN_APP String null
string
Yes Specifies the package name of the application that
must be pinned after a device restart. If this
parameter is configured and the specified
application is installed, Avaya Vantage
™
shows this
application after login. Users cannot switch to
another applications or navigate to the Home
screen.
You can also specify a comma-sprarated list of
package names for applications to be pinned using
an Avaya Launcher. You must push the launcher
into the device using the PUSH_APPLICATION
parameter. PIN_APP can include a list of
application, login, and upgrade package names.
For provisioning, use the SET command in the
46xxsettings.txt file.
Examples:
SET PIN_APP
"com.avaya.android.vantage.basic"
SET PIN_APP
"com.avaya.android.vantage.basic,com.a
vaya.endpoint.avayakiosk,com.avaya.end
point.login,com.avaya.endpoint.upgrade
"
Dial plan parameters
Parameter
Type Default
value
Is set to
default
on reset
Description
PHNEMERGNUM String Null
string
Yes Specifies the emergency number. Avaya Vantage
™
dials this number when uses taps Emergency call.
The parameter value can contain up to 30
characters. You can use 0–9, *, and # characters.
This parameter is not supported in the non Avaya
Breeze
™
CSDK application based mode.
For provisioning, use PPM.
Table continues…
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
124
Comments on this document? infodev@avaya.com