Avaya Vantage - Restoring factory settings

1. Restart the device using one of the following IP Office applications:
• System Status Application
• System Monitor
For more information, see Using Avaya IP Office
™
Platform System Monitor and Using
Avaya IP Office
™
Platform System Status Application.
If an updated version of software is available for Avaya Vantage
™
, then the device
upgrades immediately after the reboot.
To upgrade all Avaya Vantage
™
devices, do the following:
2. Upgrade the IP Office system using the Upgrade Wizard of IP Office Manager.
3. Select the check box to restart all SIP devices in the environment after the system
upgrade.
For more information about upgrading through IP Office Manager, see Administering
Avaya IP Office
™
Platform with Manager.
The upgrade process updates any SIP phone firmware files held on the system. If an
updated version of software become available for Avaya Vantage
™
, then the device
upgrades immediately after the reboot.
Restoring factory settings
About this task
Use this procedure to remove all user information stored on the device and to restore original
manufacturer settings.
Resetting a device removes the following information from the device:
• All administered values.
• User-specified data, including information about all accounts.
• Device settings.
• Application data and settings that were not loaded as part of the device firmware.
• Wi-Fi network configuration.
To be able to recover settings or data after a factory reset, you must back them up using a
personal third-party account, such as Google
™
account.
Procedure
1. On the Home screen, tap Applications.
2. Tap Settings.
3. At the upper-right corner of the screen, tap Menu > Admin login and enter the
administrator password.
Restoring factory settings
May 2018 Installing and Administering Avaya Vantage
™
75
Comments on this document? infodev@avaya.com