Avaya Vantage - Network settings

Parameter Type Default
value
Is set to
default
on reset
Description
• The SET command in the 46xxsettings.txt
file.
With IP Office, set this parameter in the
46xxspecials.txt file.
ADMINTIMEFORM
AT
Integer 0 No Specifies whether Avaya Vantage
™
uses the 12-
hour or 24-hour time format. The options are:
• 0: Use the 12-hour time format.
• 1: Use the 24-hour time format.
Avaya Vantage
™
uses the selected time format in all
areas that displays time, including the top bar, call
log, and calendar.
For provisioning, use the SET command in the
46xxsettings.txt file.
This parameter is supported in all modes.
Network settings
The following sections describe network configuration settings, such as Ethernet, VLAN, QoS, and
IEEE 802.1X.
General settings
Parameter
Type Default
value
Is set to
default
on reset
Description
IPADD String 0.0.0.0 Yes Specifies the IP address of the Avaya Vantage
™
device. The range is from 7 to 15 ASCII characters.
This is a testable parameter.
The parameter can be used in conditional
statements in the 46xxsettings.txt file.
This parameter is supported in all modes.
For provisioning, use:
• The yiaddr field value in the DHCPACK message.
Table continues…
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
100
Comments on this document? infodev@avaya.com