EasyManua.ls Logo

Avaya Vantage - Avaya Aura Device Services Configuration; IP Office Configuration for Avaya Vantage

Avaya Vantage
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Avaya Vantage
uses PPM to:
Obtain emergency numbers.
Obtain configuration parameters that impact the Avaya Vantage
platform, such as
PROCPSWD.
Back up and restore specific user configuration settings, such as language or time format
settings. When the user logs in to any registered device, PPM restores user data on the
device.
CSDK-based applications, such as Avaya Vantage
Basic, use PPM for the following purposes:
For contact management, such as retrieving and updating of PPM or Avaya Aura
®
contacts.
To obtain emergency numbers and Differentiated Service Code Point (DSCP) values.
To obtain application configuration parameters.
Until SIP registration succeeds, Avaya Vantage
uses IP addresses specified in
SIP_CONTROLLER_LIST for the getInitialEndpointConfiguration request. If the PPM server is
unreachable, Avaya Vantage
tries the next IP address from SIP_CONTROLLER_LIST. Similarly,
after SIP registration is complete, Avaya Vantage
uses IP addresses from
SIP_CONTROLLER_LIST to perform all other PPM requests. If the PPM server is unreachable,
Avaya Vantage
tries the next IP address from SIP_CONTROLLER_LIST.
PPM is disabled if the value of ACTIVE_CSDK_BASED_PHONE_APP is “” (null string), or if the
application specified in ACTIVE_CSDK_BASED_PHONE_APP is not installed.
Avaya Aura
®
Device Services configuration
Configure the Avaya Aura
®
Device Services server to:
Use Unified Login credentials for logging in to Avaya Vantage
.
Manage contacts.
For information about Avaya Aura
®
Device Services installation and administration, see:
Deploying Avaya Aura
®
Device Services
Administering Avaya Aura
®
Device Services
IP Office configuration for Avaya Vantage
Avaya Vantage
devices are supported with IP Office Release 11.0 and later. To deploy Avaya
Vantage
devices in the IP Office environment, the following requirements apply:
IP Office Server Edition, IP Office Select, or IP500 V2 system running IP Office Release 11.0.
A separate HTTP file server to host both the Avaya Vantage
firmware and APK.
IP Office configuration for Avaya Vantage
May 2018 Installing and Administering Avaya Vantage
35
Comments on this document? infodev@avaya.com

Table of Contents

Related product manuals