Avaya Vantage - Avaya Vantage Basic Parameters

Parameter Type Default value Is set to
default on
reset
Description
PHNPBXMAINPRE
FIX
String Null string Yes Specifies the PBX main prefix.
This parameter is obsolete. While it is still
supported for backward compatibility,
Avaya recommends you to use the newer
parameter, DIALPLANPBXPREFIX.
DIALPLANAREAC
ODE
String Null string Yes Specifies the area or city code.
SP_AC String Null string Yes Specifies the area or city code.
This parameter is obsolete. While it is still
supported for backward compatibility,
Avaya recommends you to use the newer
parameter, DIALPLANAREACODE.
Avaya Vantage
™
Basic parameters
Layer 3 QoS parameters
Parameter
Type Default
value
Is set to
default
on reset
Description
DSCPAUD Numeric 46 Yes Specifies the decimal presentation of Differentiated
Services Code Point (DSCP) for audio frames
generated by the device.
You can assign a value between 0 and 63.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file. The precedence is 3.
• The TIA LLDP MED Network policy TLV. The
precedence is 4.
DSCPSIG Numeric 34 Yes Specifies the decimal presentation of DSCP for
signaling frames generated by the device.
You can assign a value between 0 and 63.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file. The precedence is 3.
Table continues…
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
152
Comments on this document? infodev@avaya.com