Replace <password> with the password that you provided when generating the report.
On Windows-based computers, you can install OpenSSL from binaries to run the openssl
command.
The decrypted reports are saved in the following archive files:
• Debug report: debugreport.decrypted.tar.gz
• Audio report: media_report.decrypted.tar.gz
4. To extract the decrypted archive file, do one of the following:
• On Windows-based computers, use any program that can extract zip archives.
• On Linux systems, run the following command:
tar –zxvf <archive_file_name>
Configuring the SSH server settings
About this task
Use this procedure to enable challenge-response authentication on SSH.
Procedure
1. Tap Settings.
2. Enable the Administrator mode.
3. Tap Debugging options > SSH server settings.
4. (Optional) To enable SSH remote access, select the SSH server mode check box.
5. (Optional) To enable sroot access, select the SSH server root mode check box.
Enabling port mirroring
About this task
Use this procedure to copy the Ethernet packets that are transmitted or received on the network to
the secondary Ethernet port.
This functionality is only available if you have an embedded Ethernet switch on Avaya Vantage
™
.
Procedure
1. Tap Settings.
2. Enable the Administrator mode.
3. Tap Debugging options > Port mirroring.
4. Select the Port mirroring check box.
Maintenance
May 2018 Installing and Administering Avaya Vantage
™
80
Comments on this document? infodev@avaya.com
To Next Page
Loading...
