• If ACTIVE_CSDK_BASED_PHONE_APP is set to the default value (“”), Avaya Vantage
™
operates in the non Avaya Breeze
™
CSDK application based mode. In this case, some
configuration parameters are not supported and some options are not available on the
Settings menu of Avaya Vantage
™
. You can still configure unsupported parameters, but Avaya
Vantage
™
and telephony applications will not use the configured values. For more information
about whether a parameter is supported in the non Avaya Breeze
™
CSDK application based
mode, see Appendix A, Supported configuration parameters.
The main non Avaya Breeze
™
CSDK application that Avaya Vantage
™
supports is Avaya
Vantage
™
Open. This application is currently supported with third-party SIP registrar and
communication platform, such as Broadsoft.
When in the non Avaya Breeze
™
CSDK application based mode, backing up of the user
configuration on PPM is not supported. If a parameter supports backing up on PPM and is
supported in the non Avaya Breeze
™
CSDK application based mode, then this parameter keeps the
configured value unless the user reverts to the factory default settings of the device.
Device configuration using DHCP options
Avaya Vantage
™
connects to the DHCP server during the boot up. Use the DHCP server to
provide the following information to the device:
• IP address
• Subnet mask
• IP address of the HTTP or HTTPS file server
• IP address of the DNS server
Configurable DHCP options
The following options can be configured on the DHCP server:
Option
Description
Option 43 Specifies the encapsulated vendor-specific options that clients and servers use to
exchange information. To use this option, Avaya Vantage
™
sends option 60 with the
value ccp.avaya.com. Option 43 is processed only if the first code in the option is 1
with a value of 6889. All values are interpreted as strings of ASCII characters that
are accepted with or without a null termination character. Any invalid value is ignored
and the corresponding parameter value is not set.
Option 55 Specifies the parameter request list. Acceptable values are:
• 1 for subnet mask
• 3 for router IP addresses
• 6 for domain name server IP address or addresses
• 7 for log server IP address or addresses
Table continues…
Device configuration
May 2018 Installing and Administering Avaya Vantage
™
46
Comments on this document? infodev@avaya.com
To Next Page
Loading...
