Avaya Vantage - Package Names of CSDK-Based Applications

If you want to use an CSDK-based telephony application, you also need to set up the
ACTIVE_CSDK_BASED_PHONE_APP parameter. For more information, see Package names of
CSDK-based applications on page 71.
Note:
Avaya Vantage
™
with IP Office Release 11.0 only supports the Avaya Vantage
™
Basic
application. Avaya Equinox
®
and Avaya Vantage
™
Open are not supported.
Package names of CSDK-based applications
The following table shows package names of the CSDK-based phone applications. If you want to
use the CSDK-based phone application, you need to set the
ACTIVE_CSDK_BASED_PHONE_APP parameter using the corresponding package name.
Application Package name
Avaya Equinox
®
“com.avaya.android.flare”
Avaya Vantage
™
Basic “com.avaya.android.vantage.basic”
Parameter settings for IP Office environments
With IP Office, the K1xxSupgrade.txt file is automatically-generated. This file defines the
ACTIVE_CSDK_BASED_PHONE_APP and PUSH_APPLICATION parameters, as shown in the
following example:
## IPOFFICE/11.0.0.0.0 build 830 10.133.134.138 AUTOGENERATED
SET APPNAME K1xx_SIP-R1_1_0_1_3105.tar
GET 46xxsettings.txt
SET ACTIVE_CSDK_BASED_PHONE_APP "com.avaya.android.vantage.basic"
SET PUSH_APPLICATION
com.avaya.android.vantage.basic_playstore_1.1.0.1.0002_280318_8334068.apk
Setting up a CSDK-based telephony application as the active application
May 2018 Installing and Administering Avaya Vantage
™
71
Comments on this document? infodev@avaya.com