Avaya Vantage - Setting up a File Server Address

Procedure
When you are logged in, do the following:
1. On the Home screen, tap Applications.
2. Tap Settings.
3. At the upper-right corner of the screen, tap Menu > Admin login.
4. Enter the administrator password, and tap OK.
When you are logged out, do the following:
5.
On the Login screen, tap the Settings (
) icon.
6. At the upper-right corner of the screen, tap Menu > Admin login.
7. Enter the administrator password, and tap OK.
Setting up a file server address
About this task
Use this procedure to set up a file server address for downloading software distribution packages
and settings files. If the file server address is configured through DHCP or LLDP, you do not need
to configure the file server address in the Settings menu of Avaya Vantage
™
.
Procedure
1. On the Home screen, tap Applications.
2. Tap Settings.
3. Tap More > File server.
4. Enter the HTTP or HTTPS address of your file server.
A file server URL must have the following format:
• http://hostname[:port][/path] or
•
https://hostname[:port][/path]
In the URL:
• hostname is either an IP address in dotted-decimal format or a domain name.
• port is an optional port number.
• path is an optional path to a directory where distribution packages and other files are
stored.
Device configuration using the Settings menu on the device
May 2018 Installing and Administering Avaya Vantage
™
59
Comments on this document? infodev@avaya.com