Pinging a device on the network
About this task
Use this procedure to ensure that Avaya Vantage
™
can reach a particular IP address or a host on
the network.
This option is also available when you are logged out of the device.
Procedure
1. Tap Settings.
2. Enable the Administrator mode.
3. Tap Debugging options > Host to ping.
4. Enter the IP address or host name of the device.
5. Tap OK.
Avaya Vantage
™
displays statistics of the ping messages if the device can resolve the IP
address.
Debugging and monitoring the device
May 2018 Installing and Administering Avaya Vantage
™
81
Comments on this document? infodev@avaya.com
To Next Page
