Note:
In an IP Office environment, to log in as an administrator, you must set the
administrator password using the SET_ADMINPSWD=x NUSN, where x is the password
that is added to the 46xxsettings.txt file.
For example: SET_ADMINPSWD=Avaya@1234
4. Tap Backup & reset > Factory data reset.
5. Tap Reset device.
6. Tap Erase everything.
The device restarts. The process takes approximately 20 minutes to complete.
Rebooting Avaya Vantage
™
from the Settings menu
About this task
Use this procedure to restart Avaya Vantage
™
manually. You can also reboot Avaya Vantage
™
to
initiate an upgrade.
Procedure
1. Go to the Settings menu.
2. Tap Backup & reset.
3. Tap Reboot and then tap Yes to confirm.
If the file server contains a new version of software, Avaya Vantage
™
downloads and
installs updates according to the configured upgrade policy.
Failover and survivability
If the control server that is currently active fails, the exact behavior of a communication application
is determined by the application’s internal policies. The exact list of operations that can be
performed during failover might be different for each application.
Maintenance
May 2018 Installing and Administering Avaya Vantage
™
76
Comments on this document? infodev@avaya.com
To Next Page
Loading...
