Avaya Vantage - Chapter 6: Device configuration

Chapter 6: Device configuration
The following list shows the methods you can use to configure Avaya Vantage
™
. The methods are
listed in order of precedence:
• DHCP
- Standard
- Option 43
- Option 242
• 46xxsettings.txt file
• Avaya Aura
®
Device Services for Avaya Aura
®
• LLDP
• PPM for Avaya Aura
®
• Settings menu on the device
Note:
The order might be different for some parameters. For more information, see the required
parameter description in Appendix A, Supported configuration parameters.
Most of the parameters are configurable through multiple methods. When Avaya Vantage
™
receives
a new parameter value, it checks precedence rules to determine whether the new value must be
applied. Avaya Vantage
™
changes the parameter value only if the precedence level of the new value
source is higher than the precedence level of the current value source. If a source precedence level
is not defined for a parameter, Avaya Vantage
™
does not use values provided by this source for the
parameter.
Avaya Vantage
™
modes
Depending on the ACTIVE_CSDK_BASED_PHONE_APP value, Avaya Vantage
™
operates in the
following modes:
• If the ACTIVE_CSDK_BASED_PHONE_APP value contains the name of an Avaya Breeze
™
CSDK application, Avaya Vantage
™
operates in the Avaya Breeze
™
CSDK application based
mode. When in this mode, Avaya Vantage
™
supports the Login screen and configuration
sharing.
Use ACTIVE_CSDK_BASED_PHONE_APP only when the active phone application is an
Avaya Breeze
™
CSDK application, such as Avaya Equinox
®
or Avaya Vantage
™
Basic. You can
push an Avaya Breeze
™
CSDK application on the device as the active phone application
through the PUSH_APPLICATION parameter. If no Avaya Breeze
™
CSDK application is on the
device, ACTIVE_CSDK_BASED_PHONE_APP must use the default value.
May 2018 Installing and Administering Avaya Vantage
™
45
Comments on this document? infodev@avaya.com