Wireless handset state LED indication Notes
Wireless handset is in the Pairing
mode.
LED flashes every 0.5 seconds. Wireless handset exits the Pairing
mode in 150 seconds.
Pairing completed successfully. LED flashes 10 times at 0.1
seconds rate.
None
Wireless handset is used in a call LED flashes 3 times every 3
seconds
None
Wireless handset is turned on
and is connected to its base
(Connected mode).
LED flashes 2 times every 5
seconds.
None
Wireless handset is trying to
establish connection to its base
(Linkback mode).
LED flashes every 0.5 seconds. None
Wireless handset is out of range
and is not trying to establish
connection to its base (Standby
mode).
LED flashes every 5 seconds. Wireless handset is turned off
after 22 minutes.
Incoming call. LED flashes 3 times every 7
seconds.
None
Mute. LED is on and flashes 3 times
every 4 seconds.
None
Wireless handset has been
turned on.
LED flashes 4 times. None
Wireless handset has been
turned off.
LED flashes 3 times. None
Power button
The Power button provides the following functionality:
Action
How to use Handset LED confirmation
Turn on the handset Press and hold the button for 2.4
seconds
LED flashes 4 times
Turn off the handset Press and hold the button for 3.2
seconds
LED flashes 3 times
Enable pairing mode Press and hold the button for 10
seconds
LED flashes at 0.5 seconds rate
Camera specifications
Avaya offers the following options of Avaya Vantage
™
devices:
• Avaya Vantage
™
with an integrated camera
• Avaya Vantage
™
without an integrated camera
Avaya Vantage
™
overview
May 2018 Installing and Administering Avaya Vantage
™
20
Comments on this document? infodev@avaya.com
To Next Page
Loading...
