Avaya Vantage - Page 153

Parameter Type Default
value
Is set to
default
on reset
Description
• The TIA LLDP MED Network policy TLV. The
precedence is 4.
DSCPVID Numeric 34 Yes Specifies the decimal presentation of DSCP for
video frames generated by the device.
You can assign a value between 0 and 63.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file. The precedence is 3.
• The TIA LLDP MED Network policy TLV. The
precedence is 4.
Call option parameters
Parameter Type Default
value
Is set to
default
on reset
Description
ENABLE_REDIAL Numeric 1 Yes Specifies whether the Redial button is available to
users.
Assign one of the following values:
• 0: The Redial button is unavailable.
• 1: The Redial button is available.
For provisioning, use the SET command in the
46xxsettings.txt file.
CCBTNSTAT Numeric 1 Yes Specifies whether you can enable or disable the
conferencing, call transfer, call hold, and mute
features separately using the corresponding
parameters.
Assign one of the following values:
• 0: Avaya Vantage
™
Basic uses the values of
parameters related to these features. You can
configure the availability of each feature
separately.
• 1: Avaya Vantage
™
Basic ignores the values of
parameters related to these features. All features
are available to users.
When CCBTNSTAT is set to 0, use the following
parameters to configure feature availability:
• CONFSTAT: For conferencing
• HOLDSTAT: For call hold
Table continues…
Avaya Vantage
™
Basic parameters
May 2018 Installing and Administering Avaya Vantage
™
153
Comments on this document? infodev@avaya.com