Avaya Vantage - Page 154

Parameter Type Default
value
Is set to
default
on reset
Description
• MUTESTAT: For mute
• XFERSTAT: For call transfer
For provisioning, use the SET command in the
46xxsettings.txt file.
HOLDSTAT Numeric 1 Yes Specifies whether the Hold button is available to
users. Avaya Vantage
™
Basic ignores this
parameter if CCBTNSTAT is set to 1.
Assign one of the following values:
• 0: The Hold button is disabled.
• 1: The Hold button is enabled.
For provisioning, use the SET command in the
46xxsettings.txt file.
MUTESTAT Numeric 1 Yes Specifies whether the Mute button is available to
users. This option controls muting for both audio
and video. Avaya Vantage
™
Basic ignores this
parameter if CCBTNSTAT is set to 1.
Assign one of the following values:
• 0: The Mute button is disabled.
• 1: The Mute button is enabled.
For provisioning, use the SET command in the
46xxsettings.txt file.
CONFSTAT Numeric 1 Yes Specifies whether the Conference button is
available to users. Avaya Vantage
™
Basic ignores
this parameter if CCBTNSTAT is set to 1.
Assign one of the following values:
• 0: The Conference button is disabled.
• 1: The Conference button is enabled.
For provisioning, use the SET command in the
46xxsettings.txt file.
XFERSTAT Numeric 1 Yes Specifies whether the Call transfer button is
available to users. Avaya Vantage
™
Basic ignores
this parameter if CCBTNSTAT is set to 1.
Assign one of the following values:
• 0: The Call transfer button is disabled.
• 1: The Call transfer button is enabled.
Table continues…
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
154
Comments on this document? infodev@avaya.com