Avaya Vantage - Page 155

Parameter Type Default
value
Is set to
default
on reset
Description
For provisioning, use the SET command in the
46xxsettings.txt file.
Audio parameters
Parameter Type Default
value
Is set to
default
on reset
Description
ADMIN_CHOICE_
RINGTONE
String Default Yes Specifies the ring tone that Avaya Vantage
™
Basic
uses for incoming calls.
For provisioning, use the SET command in the
46xxsettings.txt file.
Contact parameters
Parameter Type Default
value
Is set to
default
on reset
Description
ENABLE_MODIFY
_CONTACTS
Numeric 1 Yes Specifies whether users can modify contacts.
Assign one of the following values:
• 0: Users cannot modify contacts.
• 1: Users can modify contacts.
For provisioning, use the SET command in the
46xxsettings.txt file.
NAME_SORT_OR
DER
String last,first Yes Specifies how contact names are sorted.
You can assign one of the following values:
• last,first: Avaya Vantage
™
Basic sorts contacts
according to the last name and then according to
the first name.
• first,last: Avaya Vantage
™
Basic sorts contacts
according to the first name and then according to
the last name.
For example: SET NAME_SORT_ORDER
"first,last".
For provisioning, use the SET command in the
46xxsettings.txt file.
NAME_DISPLAY_
ORDER
Numeric 0 Yes Specifies how contact names are displayed.
Table continues…
Avaya Vantage
™
Basic parameters
May 2018 Installing and Administering Avaya Vantage
™
155
Comments on this document? infodev@avaya.com