Avaya Vantage - Page 99

Language and country settings
Parameter Type Default
value
Is set to
default
on reset
Description
ISO_SYSTEM_LA
NGUAGE
String en_US Yes Specifies the device system language.
ISO_SYSTEM_LANGUAGE uses the LL[_CC]
format where:
• LL is a language code. The language code is
represented by two lowercase letters. For
example: en. For more information about codes,
see
ISO 639-1.
• CC is an optional country code. The country code
is represented by two uppercase letters. For
example: GB. For more information about codes,
see ISO 3166-1.
If you use an optional country code, then the
language code and the country code must be
separated by the underscore symbol.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
COUNTRY String USA Yes Specifies a country where Avaya Vantage
™
is used.
This parameter is used for country-specific Wi-Fi
and anti-flickering frequency settings. If Avaya
Vantage
™
cannot identify the country specified in
the parameter, it applies default settings.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Date and time settings
Parameter
Type Default
value
Is set to
default
on reset
Description
TIMEZONE String Etc/GM
T
Yes Specifies the time zone in the Olson name format.
For example: America/New_York.
For more information about the name format and for
a list of time zones, see the Time Zone Database.
This parameter is supported in all modes.
For provisioning, use:
• DHCP option 242.
Table continues…
Phone UI related settings
May 2018 Installing and Administering Avaya Vantage
™
99
Comments on this document? infodev@avaya.com