Parameter Type Default
value
Is set to
default
on reset
Description
TLS_VERSION Numeric 1 Yes Specifies which TLS versions are supported with all
TLS connections used by Android and Avaya
applications. Assign one of the following values:
• 0: TLS versions 1.0 and 1.2 are supported.
• 1: TLS version 1.2 only is permitted.
Note:
Before upgrading to R1.1, you must verify that
the TLS version 1.2 is enabled on the HTTP/S
file server if HTTP/S is used. Otherwise, the
device cannot download configuration and
image files from the HTTP/S file server.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
LLDP
Parameter
Type Default
value
Is set to
default
on reset
Description
LLDP_ENABLED Integer 1 Yes Specifies whether LLDP is enabled. Assign one of
the following values:
• 0: Disabled.
• 1: Enabled.
• 2: Enabled. Avaya Vantage
™
starts to transmit
LLDP frames only after receiving of an LLDP
frame.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Other operational parameters and settings
May 2018 Installing and Administering Avaya Vantage
™
133
Comments on this document? infodev@avaya.com
To Next Page
