Parameter Type Default
value
Is set to
default
on reset
Description
• Use the SET command in the settings file from
Avaya Aura
®
Device Services. The
46xxsettings.txt file from the HTTP or
HTTPS server is not supported.
SIPHA1 String Null Yes Specifies the HA1 hash value of the user’s
password used to register on a SIP server. HA1 is
calculated as MD5 (username:domain:password).
The parameter value can contain up to 255
alphanumerical characters.
This parameter is not supported in the non Avaya
Breeze
™
CSDK application based mode.
This parameter is only configurable from Avaya
Aura
®
Device Services. The 46xxsettings.txt
file from the HTTP or HTTPS server is not
supported.
PROCPSWD String 27238 Yes Specifies the password required to access local
administrator menu options in the Settings menu on
Avaya Vantage
™
.
The parameter value can contain from 4 to 7
numeric characters.
If both PROCPSWD and ADMIN_PASSWORD
have default values, you cannot access
administrator options in the Settings menu.
This parameter is supported in all modes.
For provisioning, use:
• A name=value pair in a DHCPACK message.
• The SET command in the 46xxsettings.txt
file.
• The value stored on the PPM server.
ADMIN_PASSWO
RD
String Null Yes Specifies the complex password required to access
local administrator options in the Settings menu on
Avaya Vantage
™
.
The range is the default string length.
• If ADMIN_PASSWORD is configured, Avaya
Vantage
™
ignores PROCPSWD.
• If ADMIN_PASSWORD has the default value,
Avaya Vantage
™
uses PROCPSWD to provide
access to administrator options in the Settings
Table continues…
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
142
Comments on this document? infodev@avaya.com
To Next Page
Loading...
