Avaya Vantage - Page 43

Parameter Type Default
value
Description
MYCERTREPLACE Numeric 90 Specifies the period of the certificate's validity interval.
This period is specified as a percentage. Avaya Vantage
™
uses this percentage to calculate the date of the
certificate replacement before its expiration. The range is
from 1 to 99.
When the configured period is over, Avaya Vantage
™
generates a new pair of private and public keys and
requests to sign the new CSR using SCEP from the CA
server.
MYCERTCAID String CAIdenti
fier
Specifies the Certificate Authority Identifier. CA servers
might require a specific CA Identifier string in order to
accept GetCA requests. If the device works with such a
CA, the CA identifier string can be set through this
parameter.
PKCS12URL String Null Specifies the URL where a PKCS12 file containing an
identity certificate is stored.
PKCS12PASSWORD String Null Specifies a PKCS12 password.
CERT_INSTALL_APPLI
CATION_LIST
String all Specifies applications that can install trusted and identity
certificates on Avaya Vantage
™
.
ID_CERT_APPLICATIO
N_LIST
String all Specifies applications that can access identity certificates
stored on Avaya Vantage
™
.
SCEPPASSWORD String $SERIA
LNO
Specifies a challenge password to use with SCEP. The
value of SCEPPASSWORD, if non-null, is included in a
challengePassword attribute in SCEP certificate signing
requests.
If the value contains $SERIALNO, $SERIALNO is
replaced by the value of SERIALNO. If the value contains
$MACADDR, $MACADDR is replaced by the value of
MACADDR without the colon separators.
VLAN parameters
Configure the following virtual local area network (VLAN) parameters:
Parameter
Set to Notes
L2Q 0, 1, or
2
Specifies 802.1Q VLAN tagging mode. Assign one of the following
values:
• Auto (0): The device sends tagged packets on L2QVLAN. If the
DHCP server is unreachable, the device sends untagged
packets until the VLANTEST time.
• Tag (1): The device sends tagged packets on L2QVLAN. If the
DHCP server is unreachable, the device sends tagged packets
with VLAN equals to 0 until the VLANTEST time.
Table continues…
Parameter configuration for secure installation
May 2018 Installing and Administering Avaya Vantage
™
43
Comments on this document? infodev@avaya.com