• On, unicast and multicast EAPOL: To enable the Supplicant operation. The device
responds to received unicast and multicast EAPOL messages.
6. (Optional) To change the Extensible Authentication Protocol (EAP) type to be used for
IEEE 802.1x authentication, tap EAP Type, and select one of the following options:
• EAP-MD5
• EAP-TLS
Device configuration
May 2018 Installing and Administering Avaya Vantage
™
64
Comments on this document? infodev@avaya.com
To Next Page
Loading...
