Avaya Vantage - Page 83

Avaya Vantage
™
starts the boot recovery procedure and displays a list of options.
6. Select one of the following options:
• Reboot: Stops the boot recovery procedure and reboots the device.
• Clear phone : Resets the device to its factory settings.
• Erase /cache only: Erases the cache partition of the device that is primarily used to
store recovery logs and temporary files.
• Erase /data only: Erases the data stored on the device.
• Swap memory banks: Swaps the boot banks on the device so the primary boot bank
becomes the secondary boot bank. Avaya Vantage
™
always has 2 copies of firmware:
- Current firmware. Avaya Vantage
™
uses this firmware to boot up.
- Previously installed firmware. This firmware is updated every time the firmware on the
device is upgraded.
• Force SELinux Permissive mode: Starts the system with SELinux in Permissive mode.
When Permissive mode is enabled, the SELinux security policy is disabled, but the
system still logs all events related to the security policy.
Firmware is corrupted
May 2018 Installing and Administering Avaya Vantage
™
83
Comments on this document? infodev@avaya.com