Avaya Vantage - Page 97

Parameter Type Default
value
Is set to
default
on reset
Description
This parameter is supported by wired handsets
only.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
HEADSET_PROFI
LE
Numeric 0 Yes Specifies the headset audio profile selected by the
user.
The range is from 0 to 20. If the value of
HEADSET_PROFILE is 0, the headset audio profile
is not selected.
This parameter is supported in all modes.
For provisioning, use the Settings > Audio
settings > Headset profile menu on the device.
This parameter can be stored on the PPM or
backup server.
HEADSET_PROFI
LE_DEFAULT
Numeric 1 Yes Specifies the number of the default headset audio
profile.
The range is from 1 to 20.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
HEADSET_PROFI
LE_NAMES
String Null Yes Specifies names to be displayed for headset audio
profile selection.
The value of the parameter is a list of profile names
separated by commas without any spaces between
entries. If profile names include spaces, the list
must use quotations. Names must not contain
commas or double quote characters. To retain the
default name of a specific profile, do not provide a
new name for the profile.
The parameter can contain up to 0 to 255 octets of
UTF-8 characters.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
For example, to rename the first and third profiles
and to retain the default name of the second profile,
enter the following: SET
Table continues…
Phone UI related settings
May 2018 Installing and Administering Avaya Vantage
™
97
Comments on this document? infodev@avaya.com