SUMMARY | SAFETY WARNINGS
SAFETY WARNINGS
The installation and servicing instructions in this manual are for use by qualified personnel only.
Read All Instructions. All safety and operating instructions must be read before operating the
product. They also must be retained for future reference, as it contains many useful hints for
determining the best combination of equipment settings for Yr particular application.
Heed All Warnings. All warnings on the product and those listed in the operating instructions must
be adhered to.
Heat. This product must be situated away from any heat sources such as radiators or other products
(including power amplifiers or transmitters) that produce heat.
Power Sources. This product must be operated from the type of power source indicated on the
marking label and in the installation instructions. If you are not sure of the type of power supplied to
your facility, consult your local power company. Make sure the AC main voltage corresponds to that
indicated in the technical specifications. If a different voltage (ex. 110/115 VAC) is available, open
the equipment closure and set the voltage switch on the main supply circuit, located behind the AC
socket.
Power Cord Protection. Power supply cords must be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. Pay particular attention to the cords at AC wall
plugs and convenience receptacles, and at the point where the cord plugs into the product.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
Lightning. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods, unplug it from the AC wall outlet and the audio
connections. This will prevent damage to the product due to lightning and power-line surges.
Installation. Configuration and installation should only be carried out by a competent installation
engineer.
Cabling. Using high-quality wires, well-protected. Make sure the cable is integrity.
To Next Page
Loading...