AxelTech OXYGEN 3000 PLUS - TECH SPECS; Analog Balanced Microphone Inputs; Analog Balanced Stereo Inputs

OXYGEN
3000 PLUS
·
User Manual
·
ENG
TECH SPECS | SERVICE
TECH SPECS
Analog Balanced Microphone Inputs
Connector
RJ45 & XLR Balanced
–
EMI Suppressed
Input Impedance
2,4 K
Ω
Nominal Input Level (sensitivity) -9/-66 dBu
Max Input Level (clipping point) +9 dBu
A/D conversion 24-bit / 48 kHz
Signal To Noise Ratio (referred as peak level) >110 dB
THD+N <0,01%
Analog Gain Adjustable +0 ÷ +60 dB (3dB step)
Phantom Power
+48V
Analog Balanced Stereo Inputs
Connector XLR & RJ45 Balanced – EMI Suppressed
Input Impedance 10 KΩ
Nominal Input Level (sensitivity) 0 dBu
Max Input Level (clipping point) +18 dBu
A/D conversion 24-bit / 48 kHz
Frequency response +/-0,5 dB from 20 Hz to 20 kHz
Signal To Noise Ratio (referred to
as
peak level)
>100 dB
Stereo Separation (referred to
as
peak level)
>90 dB
THD+N
<0,002 %
Analog Balanced Telco Input
Connector RJ45 Balanced – EMI Suppressed
Input Impedance 10 KΩ
Nominal Input Level (sensitivity) 0 dBu
Max Input Level (clipping point) +18 dBu
A/D conversion
24
-
bit / 48
kH
z
Signal To Noise Ratio (referred to
as
peak level)
>1
1
0 dB
THD+N
<0,002%