© AXION TECHNOLOGIES LTD. OPERATION
Menu
No.
Use Action
3
Menus Password Password programming giving access to menus on Control
Console.
Step 1 Enter existing 4-digit and/or 4-letter password (Factory
programmed value: "1234"). The hardcoded “9595” replaces
default/personal password at all times.
Step 2 Enter new 4-digit and/or 4-letter password.
4
Distress Signal Password Password programming allowing to deactivate distress message
already displayed.
Step 1 Enter existing 2-digit and/or 2-letter password (Factory
programmed value: "00"). The hardcoded “95” replaces the
personal or default “00” code at all times.
Step 2 Enter new 2-digit and/or 2-letter password.
5
Public Message
Password
Password programming giving access to programmed public
message in system (to be used with menu 11).
Step 1 Enter existing 4-digit and/or 4-letter password (Factory
programmed value: "1234") or the hardcoded “9595”.
Step 2 Enter new 4-digit and/or 4-letter password.
6
Activate/Deactivate
Automatic Route
When you start the bus, it allows Control Console to automatically
recall the last route number entered before you switched off the
bus engine.
Step 1 Displays current status for a few seconds (Factory programmed
value: activate).
Step 2 Allows to modify current status.
1. Activate Activates automatic recall of last route entered before you
switched off the vehicle engine. At start-up, recalls last route
entered.
2. Deactivate Deactivates automatic recall. At start-up, Control Console deletes
sign contents.
User Manual (Revision A) Document No.: 3042145 Page 34
To Next Page
Loading...
Need help?
General