Barco DP2K-6E User Manual

37
About this chapter
This chapter gives an overview of available lenses for your Athena and explains how to select the best suited
lens for a specific situation using the lens calculator. Also, it is explained how to install and remove a lens from
the projector Lens Holder and how to shift, zoom and focus the lens.
CAUTION: Never transport the projector with a Lens mounted in the Lens Holder. Always remove
the Lens before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
CAUTION: Caution when removing or installing the lens! Fragile parts at the inner side of the Lens
Holder.
Each time a lens is manipulated (e.g. removed and installed in a projector), it needs to be homed
and returned.
Overview
•
Available lenses
• Lens selection
• Lens installation
• Mounting the lens safety cable
• Lens removal
• Lens shift, zoom & focus
R5906790 /04 Athena
Lenses & Lens
selection
6

Barco DP2K-6E Specifications

General

Contrast ratio (typical)	1600:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
Noise level	48 dB
AC input voltage	200 - 240 V