Barco DP2K-6E User Manual

59
About this chapter
This chapter describes the ICMP (-X) in general, the HDDs, the input ports and the communication ports.
Furthermore, the status LEDs are described and the importance of the device certificate is illustrated.
Image 8-1
Overview
•
ICMP(-X) introduction
• ICMP(-X) HDD
• What are the possible HDD swaps
• Installing a HDD into the ICMP(-X)
• Removing a HDD from the ICMP(-X)
• HDD status LEDs
• ICMP(-X) status LEDs
• ICMP(-X) device certificate
• Obtaining the Barco ICMP(-X) certificate
• ICMP(-X) configuration via Communicator
• ICMP(-X) communication ports
• ICMP(-X) source input ports
• ICMP(-X) network streaming (Live IP) specifications
• ICMP DisplayPort specifications
• ICMP(-X) SDI specifications
R5906790 /04 Athena
ICMP(-X) 8

Barco DP2K-6E Specifications

General

Contrast ratio (typical)	1600:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
Noise level	48 dB
AC input voltage	200 - 240 V