Baumer EA Series - Rotary Switches

Baumer_EAx_EtherNetIP_EN_MNL 11/81 www.baumer.com
02.20
Note:
After having used the preset/reset button the screw cap must be screwed in again and tightened with a
torque of 1.5 Nm.
3.2.3. Rotary Switches
With the two rotary switches the address can be set to 192.168.1.xy where x and y are defined by the
hexadecimal values set by the rotary switches.
For detailed information see chapter Via Rotary Switches.